A LinkSys WRT54G wireless/wired routerYes, your home router could indeed be letting your Second Life experience down, and a couple quite common series of routers are among the most culpable.

I’ll start by pointing out that the IEEE 802.11 networking standards aren’t the easiest set of networking protocols to implement correctly in device firmware. It’s all too easy to get them almost right, resulting in wireless access points and routers that work just fine for some kinds of workloads and that fall down spectacularly for others. As a bonus, RFC-2663 IPv4 Network Address Translation is also a commonly poorly-implemented feature in many network devices.

In my experiences from 2000 to 2005, the vast majority of wireless access-points/routers of that period – while just fine for Aunt Tilley and her Facebook habit – turned out to be duds (ranging from extraordinary failure to far more subtle symptoms) once you hooked up a power-user or a small three or four person office. They might choke and die, they might toss stations off at random, they might just run some connections very slowly, or some might unpredictably stall, leaving you wondering.

Finding good hardware during that period was a chore, and it hasn’t gotten that much better since, in my opinion. Often the best you can hope for is “just good enough” (if you’re lucky) unless you use something like a dedicated Linux system as a firewall and router.

Even such networking giants as Cisco Systems has gotten them wrong on occasion. Few (if any) manufacturers seem to be entirely exempt from glitches in these particular standards implementations.

All that said, Linden Lab has recently been performing somewhat extensive testing of consumer routers as a part of Project Shining, and come up with two common series that are already problematic with Second Life.

More →



Or slowed it down, or made it reset or caused it to go all Blue Screen of Death, or just generally messed it up, and it has been running really slow every since you installed it.

Well, no. It didn’t, necessarily, and here’s why.

More →


Being that I just got a new PC – entirely thanks to you, gentle readers – let’s talk hardware that will run Second Life well. That is, kit that will work smoothly and not turn into a slide-show even if you crank everything up.

More →

Dec 5 2010

I’m a bit suspicious about the current state of my nvidia 8600GT video card. About a year ago, I was a bit concerned that it might have been overheating, leading to graphics corruption and crashes. I picked up a couple of tools to monitor the GPU temperature, and found that when it was under heavy loads, the temperature would get quite high – or at least what I felt was quite high – climbing into the low 80s.

That’s 80 degrees Celsius, just 20 degrees short of the temperature where water boils. I got a tweaking tool and ramped the fan profile up a bit, which kept the temperature peaking in the mid 70s, and all seemed to be well.

Yesterday, though, I discovered something odd.

More →


  • Support us

    Writing is my day job. Site advertising pays for the hosting, but nothing else. Help keep us in coffee and keyboards

    ... or donate in Second Life at this location.

  • ...or use Flattr